R Series Micro Controller

用户5928

3月26日修改

📁

To save this document locally, please click the PDF file below to download it

R Series Micro Controller.pdf

862.73KB

R series Module-level Micro controller [Module-level Rapid Shutdown Device]

The Installation and Verification of V2.5 System Control (Solution R)

1.
Installation and Verification of R Series Micro Controller​

2.
Installation and Verification of V2.5 Control Box DCON-S​

3.
Solution R System Setting​

💡

Note：Please strictly follow this guide for installation and operation, otherwise performance and warranty may be affected by some wrong operations.​

1.
Product Introduction​

APT-MC-R-T2（hereinafter referred to as R-T2）has 6 wires,namely PV1+ PV1-（Input）,PV2+ PV2-（Input）,and OUT+ OUT-（Output）​

1.
PV1+ Positive Input (to panel 1)​

2.
PV1- Negative Input (to panel 1)​

3.
OUT- Negative Output (to adjacent R-T2)​

4.
PV2- Negative Input (to panel 2)​

5.
PV2+ Positive Input (to panel 2)​

6.
OUT+ Positive Output (to adjacent R-T2)​

Yellow casing on the PV1 terminals; White casing on the PV2 terminals;

Red casing on the OUT terminals

7.
Scan the QR code to obtain the device SN number​

R Series Micro Controller​